Staff, Technical Insights, Uncategorised

Production Tips with Sameer: Tricks for mixing drums

To book Sameer Sengupta for a mastering or mixdown session, contact Lynley via mastering@studios301.com or 02 9698 5888. I have been one of the resident Mastering Engineers here at Studios 301 for almost 3 years. You can usually find me in MS2 where I specialise in mastering electronic music. Alongside mastering, I also make music, producing artists, and mixdown […]

November 18th 2013   

Steve Smart, Technical Insights

From the Desk of Steve Smart: Mastering for Vinyl – Part 2

This is the 2nd part continuing on from last week’s post, where we sat down with Senior Mastering Engineer, Steve Smart to chat about his experiences working with Vinyl. This is the second of a three part series: From the Desk of Steve Smart: Mastering for Vinyl – Part 1 From the Desk of Steve […]

November 6th 2013   

Steve Smart, Technical Insights

From the Desk of Steve Smart: Mastering for Vinyl – Part 1

Steve Smart is one of the few mastering engineers in Australia who started his career as a Vinyl Cutting Engineer (back at CBS records in the 1980’s). Based on his experience of seeing Vinyl come, go, and come back again, we asked him a few questions about Mastering for the format in the 21st Century. […]

October 31st 2013   

Uncategorised

Jack Prest’s Tips & Tricks: Recording using only a few mics.

One of the hot topics requested through our Facebook page has been ‘recording using a small number of microphones. This is a really easy technique and can be far simpler and effective than putting out every mic you have just because you can. It is especially effective when wanting to achieve that ‘vintage’ sound. Of course, […]

October 16th 2013   

Uncategorised

Guy Gray’s Tips & Tricks: CRITICAL LISTENING

Resident Producer/Engineer Guy Gray is back with another set of Tips & Tricks to share with you. This week, he lets you in on a simple but crucial skill – the gentle art of CRITICAL LISTENING. Every so often during your mixdown session, you should listen to your mix in mono at a very low SP […]

September 11th 2013   

Uncategorised

Guy Gray’s Tips & Tricks: MIXING

Guy Gray as 30 years of experience includes engineering scores, large orchestral recordings, surround mixing as well as music production for successful film projects throughout Australia and Southeast Asia. He will be providing you a with a short series of Tips & Tricks, as only he knows how. To begin with, he delves into some MIXING secrets. (1) […]

September 3rd 2013   

Recording, Staff, Technical Insights

Jack Prest’s Tips & Tricks – Vocal Reverb

One of the most important aspects of mixing a vocal and getting it to sit in your mix is the amount and type of reverb you apply to it. Reverb is critical to create depth and space around your vocal. A favourite technique of mine for a lead vocal (especially in pop music or hip […]

August 28th 2013   

Mastering, Staff

A day in the life of: the Mastering Assistant

Hi, my name is Harvey O’Sullivan and I’m the Mastering Assistant here at Studios 301. The nature of 301 is very dynamic and being an assistant requires a “Jack-of-all-trades” attitude. My responsibilities cover the daily maintenance of our 3 dedicated Mastering rooms, as well as preparing production masters. A typical day for me could be […]

June 6th 2013   

Uncategorised

Jack Prest’s Tips & Tricks – Parallel Compression

We ran a survey recently to discover what aspect of production many of you want to learn about. So, this time around I’ll be looking at a popular topic and technique, parallel compression. This is where you blend a compressed version of your signal back into the original. The idea being you can create a bigger, harder compressed […]

May 24th 2013   

Newsletter, Recording, Staff, Technical Insights

SSL vs Neve

As I tour people through our recording facilities in Sydney, I usually refer to our Neve 88R and SSL 9000k consoles as the “Ferrari and Lamborghini of mixing consoles”…. They are both the best cars that money can buy, but it’s up to the driver as to which one they prefer to drive. Occasionally that remark satisfies my visitor […]

May 8th 2013